Announcement

Collapse
No announcement yet.

TIP: Record eth0 MAC Address Prior to Reset to Factory Settings

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • TIP: Record eth0 MAC Address Prior to Reset to Factory Settings

    FYI:

    If you use the USB Installer scripts to re-flash the Linux side of the E10, be sure you know what the MAC address is for the Ethernet interface *before* you start.

    You will be asked to *set* the MAC address for eth0 (the RJ-45 Ethernet port on the E10) during the process.

    So far, I have not discovered any way to find the info - other than, of course, reading it from the E10 sticker on the unit. My unit has a big piece of self-adhesive Velcro *over* the sticker, and removing the Velcro was looking like it would destroy the sticker.

    HTH,
    -james
Working...
X