Announcement

Collapse
No announcement yet.

TIP: Re-Flashing E10 Linux Side Using USB Installer - USE FAT32 ONLY

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • TIP: Re-Flashing E10 Linux Side Using USB Installer - USE FAT32 ONLY

    Just an FYI:

    BLUF: Be sure your USB flash drive is formatted using FAT32

    I was receiving errors when attempting to re-flash my E10 after goofing up the configuration for a client application.

    I don't have the exact error messages, but they were akin to not being able to read the up-uI-installuboot.bin file.

    I got these errors while using a new 64Gb NTFS-formatted USB stick, I tried various formats until I discoverd that a 1Gb FAT32-formatted drive did the trick.

    HTH,
    -james
    Last edited by asllc.james; 09-25-2016, 09:23 PM. Reason: Add Clarity to Title - FAT32
Working...
X