Announcement

Collapse
No announcement yet.

Utilizing Telit Cell Phone Module to reprogram Synapse RF220

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Utilizing Telit Cell Phone Module to reprogram Synapse RF220

    Hello,

    I am trying to utilize a remote connection utilizing a Telit Cell phone. I have a synapse RF220 connected with the Cell phone, and I am trying to use this to re-program other Synapse radios within range. I am posting to see if anyone else has done a similar project and could offer some insight. I know that you can create a remote connection using an E10 or E20, but I am wanting to avoid that. Thanks in advance!

  • #2
    If you can establish a Virtual COM Port that talks to your cell module's serial port, you can point Portal to that port and use the RF220 just as if it was directly connected to your computer. I've successfully used the free VCP software from http://www.hw-group.com/products/hw_vsp/index_en.html, although that was via Ethernet or WiFi connections - I don't know if your Telit module supports its end of the protocol.

    Comment

    Working...
    X