Use both UARTS simultaneously

[jcwoltz]

Hello,

feeding of of this post:
http://forums.synapse-wireless.com/showthread.php?t=727

I have been asked/have a need to use both UARTS at the same time.
This will be in a point to point setup.
So Node A and Node B
both Rx/tx UArt0 on node A goto UART 0 on Node B
both rx/tx uart1 on node a goto uart1 on node a

There is a reason to separate the two serial stream, ideally using one RF200 on each end.

[hagster]

+1

I would also like this feature. I have a requirement to parse data from 2 separate devices. My work around will be to time slice between the two, but I risk missing important data.

[joop]

+1 as well!

[Jheath]

Yep, I would love to see something along these lines as well.


Note: For those tuning in: You can use both UARTs at the same time if you are doing different tasks. What we are referring here is the ability to process two different UARTs in the same manner (i.e. process both UARTs within the same SNAPpy script)

[kactamus]

It also would love to have both uarts available at the same time. It would definatley expand the scope these great units can do, and increase its popularity I.e a second serial HOOK would do it.